Humax Remote Control Instructions & Codes

Humax remote control programming will be complete with simple instructions and codes. However, it would help if you found the valid codes based on your device type and brand name. When you enter a code during the programming, the corresponding device will accept it and allow the remote to control it. Through this post, I will explain Humax remote control instructions and codes.

Manual and automatic code search methods are recommended for the Humax remote programming and can complete with simple instructions. I will explain these two programming methods to program the remote control.

Manual Method To Program Humax Remote Control

It is the code entry method. You must enter a valid code during the programming. If the code matches the device, you can access all the features of your device. Follow the below instructions to program the Humax remote control.

  1. Turn on your device manually.
  2. Insert new batteries into the remote control and point the remote control at the device sensor.
  3. Press the corresponding device button, such as TV, DVD, or AUD, for three seconds until the device button turns on.
  4. Now, enter the code from the code list using remote keys. The device button will blink every time each code is entered. The device button will blink twice.
  5. If you enter a valid code, the device will turn off. Press the “OK” button immediately to lock the code in the remote.
  6. If you enter an incorrect code, the corresponding device won’t turn off, and you must enter a valid code again by following the exact programming instructions from Step 3.
  7. If the program is successful, the device button will blink three times.

After completing the setup, check the remote keys, such as volume, power, and more you wish to control using the remote.

Automatic Code Search Method For Humax Remote Control

It is an alternative method. The remote will send a valid code to the device. However, this method may take several minutes, and you must wait until the setup completes.

  • Turn on the device you wish to control with Humax remote control.
  • Keep the remote in front of the device from an appropriate distance.
  • Press the “DEVICE” button until it turns on.
  • Now, press the Up or Down key continuously. The remote will start a code search.
  • Press the “OK” button immediately when your device turns off.
  • The “DEVICE” button will flash three times if your remote is programmed successfully.

You can use this alternative method when you can’t find a valid code for your device or cannot program the remote using the manual method.

Where Is The PVR Button On My Humax Remote

You can see the PVR button at the top of the Humax remote control. You can see the user guide and how to connect a product to the device through the button.

How To Fix Humax Remote Control

You must fix the remote issues when it doesn’t work. Firstly, insert new batteries into the remote and check the remote control to control your device. If it is not work, reprogram the remote by following the programming instructions mentioned earlier in this post.

As well as keep the remote in front of the device from an appropriate distance to send solid signals to the device. In addition, check the physical damages on the remote, run the power cycle, and remove the obstructions between the remote and the device.

What Are The Humax Remote Codes

Humax remote codes are specially designed three and four-digit codes, which must use during remote programming. These codes are unique and specific for the particular device. You must select the correct code while programming the Humax remote control.


Humax remote programming methods are straightforward, and you can easily find the codes from the code list. Humax remote codes are assigned for all entertainment devices. However, you must choose a valid code during the remote programming. If it doesn’t work after programming it successfully, you must fix the remote issues, as mentioned in this post.

Leave a Comment